服務介紹

Service Introduction

可校準氣、油、水等介質的流量計，液體最大口徑可達2.2m，氣體流量測量范圍在(0.05 ~13747) m3 /h。可開展靶式流量計、渦街流量計、渦輪流量計、電磁流量計、超聲流量計、浮子流量計、容積式流量計、差壓流量計、旋進旋渦流量計等項目的校準。

Can calibrate flow meters for media such as gas, oil, and water, with a maximum liquid diameter of 2.2m and a gas flow measurement range of (0.05~13747) m3/h. Can carry out calibration of target flow meters, vortex flow meters, turbine flow meters, electromagnetic flow meters, ultrasonic flow meters, float flow meters, volumetric flow meters, differential pressure flow meters, swirl flow meters, and other projects.

 

計量周期

Measurement Cycle

5個工作日

5 working days, urgent services are available 

 

校準項目

Calibration Items

靶式流量計、渦街流量計、渦輪流量計、電磁流量計、超聲流量計、浮子流量計、容積式流量計、差壓流量計、旋進旋渦流量計、熱式氣體質量流量計、科里奧利質量流量計、水表、膜式燃氣表、流量積算儀等。

Target flowmeter, vortex flowmeter, turbine flowmeter, electromagnetic flowmeter, ultrasonic flowmeter, float flowmeter, volumetric flowmeter, differential pressure flowmeter, swirl flowmeter, thermal gas mass flowmeter, Coriolis mass flowmeter, water meter, membrane gas meter, flow integrator, etc.